300 KPA (3 BAR)
  AXIAL LATERAL
 & ANG MOV'T
LATERAL MOVEMENT
ANGULAR
MOV'T-ONE
PLANE

ANGULAR
MOV'T-TWO
PLANE
   

DIA
Ø

 Length
Flanged		 Length
Welded
Ends		 Axial
mm		 Lateral
mm		 Angular
Deg.		 Axial
Spring Rate
N/mm		 Lateral
Spring Rate
N/mm		 Angular
Spring Rate
N/mm		 Pressure Thrust
KN		 Torsional Rotation
deg.
50 150 240 30 12 10 20 12 0.4 1.5 0.13
65 180 240 32 12 10 20 24 0.4 2 0.12
80 180 240 34 12 10 21 31 0.5 2.5 0.10
90 190 240 36 12 10 23 36 0.5 3 0.099
100 190 340 36 14 10 42 48 0.9 4 0.094
125 220 340 45 12 10 47 62 1.6 6 0.098
150 220 340 48 11 10 48 92 1.2 9 0.087
200 230 340 50 10 9 50 132 2.8 18 0.081
250 250 340 54 10 9 53 162 3.9 22 0.068
300 280 400 64 9 9 68 190 7 31 0.061
350 280 400 70 9 8 75 198 13 36 0.051
400 280 450 70 8 8 88 265 28 46 0.046
450 300 450 70 6 8 98 433 35 56 0.040
500 300 450 72 5 7 110 690 48 70 0.036
550 300 450 72 4 7 127 991 59 85 0.033
600 300 450 72 4 7 133 68 56 99 0.029
 
  Movements shown above are non concurrent
      L - LINER, C - COVER, V - VANSTONE, X - SPECIAL are added to part number
   
 
  • Data shown above is a guide and will vary depending on the actual working conditions. Contact us to optimise your design.
  • Maximum test pressure is 1 times the working pressure.
  • Standard flanges, pipe and hardware are in carbon steel.
  • Standard Bellows in 304, 316 and 321 Stanless Steel.
  • Inconel, Incoloy and other alloys available on request.
  • Only SEB, UEB, XB & DXB assemblies generate the pressure thrust noted in the table above.
  • Correct anchoring and guiding must always be used.

    Pressure to 7000 KPa, larger diameters and temps to 1100 degree C available. These are specially designed assemblies.

    Multiply, Toroidal, Pressure Balanced and Rectangular bellows are also available.